配置trunk
int fa0/2
port link-type trunk
port trunk permit vlan 10 20

配置telnet
system-view
vlan 1
port fa0/0
quit
int vlan 1
ip address 192.168.0.1 24
user-interface vty 0 4
authenmode password
set authen password simple test

设置静态路由：
system-view
ip route-static 0.0.0.0 0.0.0.0 222.111.11.1
ip route-static 192.168.0.1 255.255.255.0 222.111.11.1

设置vlan接口ip：
system-view
inter vlan-interface 1
ip address 192.168.0.1 255.255.255.0

查看命令：
dis ip routing-table
dis memory

用出接口地址做Easy nat：

acl 2000 match-order auto

[Router-acl2000] rule normal permit source 10.0.0.0 0.0.0.255

[Router-acl2000] rule deny ip source any
配置允许进行NAT转换的内网地址段

[Router]interface Ethernet0

[Router-Ethernet0] ip address 10.0.0.1 255.255.255.0

[Router] interface Ethernet1

[Router-Ethernet1] ip address 202.1.1.1 255.255.255.0


[Router-Ethernet1] nat outbound 2000 interface
在出接口上进行NAT转换

设置子接口：

[Router]inter e0
[Router-Ethernet0]ip add 10.0.0.1 255.255.255.0
[Router-Ethernet0]inter e0.1 //定义子接口E0.1
[Router-Ethernet0.1]ip add 172.16.1.1 255.255.255.0
[Router-Ethernet0.1]vlan-type dot1q vid 1 //指定以太网子接口属于VLAN1,此命令应用在以太网子接口