、There are many tools in my tool storage unit (tool chest, tool box).

　　我的工具柜（工具盒、工具箱）里面有很多工具。

　　340、Get me a hammer (hacksaw, file, scraper, chisel, socket, wrench, hook spanner, adjustable wrench, pipe wrench, ratchet wrench, open end wrench, screw driver, hand vice, pliers, pocket knife).

　　给我拿一把手锤（钢锯、锉刀、刮刀、凿子、套筒扳手、钩扳手、活动扳手、管扳手、棘轮扳手、开口扳手、螺丝刀、手钳、扁嘴钳、小刀）。

　　341、Straightedge rule (square rule, slide gauge, inside and outside micrometer, steel tape, feeler, dial gauge, depth micrometer, wire gage, radius gage, thread pitch gage) is a kind of common measuring tool.

　　直尺（角尺、游标卡尺、内径和外径千分尺、钢卷尺、塞尺、千分表、深度千分尺、线规、半径规、螺距规）是一种常用量具。

　　342、The precision of this fitter level (cross-test level) is 0.02mm/M.

　　这个钳工水平仪（框架式水平仪）的精度为0.02毫米/米。

　　343、We have got the instrument (pressure gauge, thermometer, tachometer, current meter, universal meter) ready for the experiment (test).

　　我们已经准备好做实验（试验）的仪器（压力表、温度计、转速计、电流表、万用表）。

　　344、That is an air (electric) powered grinder (portable grinder, angle grinder, straight grinder, drill, impact wrench, riveting hammer, hammer drill).

　　那是一个气（电）动砂轮机（手持砂轮机、角型砂轮、直型砂轮、钻机、冲击扳手、铆钉锤、锤钻机）。

　　345、Our electrical tools are double insulated and approved to international safety standards.

　　我们的电动工具都是双重绝缘的，并符合国际安全标准。

　　346、Hydraulic pump is the power unit of the hydraulic puller (hydraulic press, hydraulic pipe bender, hydraulic jack).

　　油压泵是油压拉出器（油压机、油压弯管机、油压千斤顶）的动力装置。

　　347、A welder’s kit contains electrode holder, welding torch, helmet shield, portable electrode heating box and temperature measuring pen.

　　一名焊工的成套工具包括焊钳、焊炬、面罩、手提式焊条加热箱和测温笔。

　　348、The diameter of this wire rope (hemp rope, sling) is three-fourth inches (3/4”).

　　这钢丝绳（麻绳、吊索）的直径为3/4英寸。

　　349、The lifting capacity of this chain hoist (hydraulic jack, screw jack) is 5tons.

　　这个吊链（油压千斤顶、螺旋千斤顶）的起重能力为5吨。

　　350、The vise (parallel-jaw vice) is available to all of the bench work.

　　所有的钳工工作都可使用台钳（平口钳）。

　　351、Grease gun and oiler are the lubrication service tools for machinery.

　　油枪和注油器都是机械润滑维护工具。

　　352、Torque wrenches offer the precision measurement needed to tighten fasteners.

　　力矩扳手可以提供禁锢螺栓所需的精确力矩计量。

　　353、The measuring unit of torque wrench is pound-inch or kilogram-centimeter.

　　力矩扳手的计量单位为镑-寸或者公斤-厘米。

　　354、Is the machine accompanied with some tools (spare parts, accessories)?

　　这台机器随机带有一些工具（备件、附件）吗？

　　355、Shall we use a special tool for this job?

　　我们干这活要使用专用工具吗？

　　356、Could you tell us how to use (operate, repair, maintain, clean, adjust) this new tool?

　　你能告诉我们如何使用（操作、修理、维护、清理、调整）这个新工具吗？

　　357、The tool gets out of order, we must remedy its trouble.

　　这工具有毛病，我们必须排除它的故障。

　　358、The tool is out of repair, it needs an overhaul.

　　这工具失修，需要拆修。

　　359、From your explanation I shall easily handle it.

　　听了你的说明，我将易于操纵它。

　　360、The tools must be well kept.

　　工具必须妥善保管。

　　十五、工程材料

　　ENGINEERING MATERIALS

　　361 There are some material warehouses(store yards)on the construction site.

　　在工地上有一些材料仓库（堆场）。

　　362 Our store officer is responsible for the warehousing and issuing of materials.

　　我们的仓库管理员负责保管和发放材料。

　　363 We use Scientific-management system for material shortage and its control.

　　我们应用科学管理体系处理材料短缺及其调节。

　　364 These materials are imported from abroad(supplied by the Seller).

　　这些材料是从国外进口的（卖方供应的）。

　　365 What is the feature about it?

　　这些材料的特性是什么？

　　366 The construction material answers our purpose satisfactorily.

　　这种建筑材料能满足我们的需要。

　　367 The average traffic fuel (gasoline) consumption of this lorry is 0.3 liter per kilometer (l/km).

　　这台货车的平均行车柴油（汽油）耗量为每公里0.3公升。

　　368 Hydraulic oil (lubrication oil )which having a viscosity of about 4.5°Eat 50℃ can be used for this vehicle (machine).

　　具有恩氏粘度4.5°E( 50℃)的液压油（润滑油）可用于此车辆（机器）。

　　369 This special oil comes from the “SHELL” company (CALTEX, MOCBIL,GULF, ESSO, CASTROL, BP).

　　这种特种油来自“壳牌”公司（加德士、飞马、海湾、埃索、卡斯特罗、英国石油公司）。

　　370 Cement steel and timber are the most important construction materials used in civil engineering.

　　水泥、钢材和木材是土建工程中最重要的建筑材料。

　　371 Typical structural steel shapes include beams, channels, angles and tees.

　　典型的结构型钢包括工字钢、槽钢、角钢和丁字钢。

　　372 There are four broad classifications of steel : carbon steels, alloy steels, high-strength low-alloy steels and stainless steels.

　　钢材大致辞可分为四类，即：碳素钢、合金钢、高强度低合金钢和不锈钢。

　　373 Copper, zinc, lead, aluminium, bronze and brass are nonferrous metals or alloys.

　　铜、锌、铅、铝、青铜和黄铜都是有色金属或合金。

　　374 This alloy is mainly composed of element chromium and nickel ( titanium, vanadium, manganese).

　　这种合金主要由元素铬和镍（钛、钡、锰）组成。

　　375 The standards “GB” and “YB” provide the method of testing for materials in our country just like the standard ASTM in America.

　　在我们GB（国标）和YB（冶标）规定材料的试验方法，正如美国的ASTM标准一样。

　　376 We have asbestos (rubber, plastic, glass, paint) products of all kinds.

　　我们有各种石棉（橡胶、塑料、玻璃、油漆）制品。

　　377 Bolt (screw, nut, stud, spring washer, pin, ball bearing, roller bearing) is the most commonly used machine part.

　　螺栓（螺钉、螺帽、双头螺栓、弹簧垫圈、销、滚珠轴承、滚柱轴承）是最常用的机械零件。

　　378 Cast iron cannot compare with steel in tensile strength.

　　铸铁在抗拉强度上比不上钢。

　　379 Erection of the equipment will be carried out according to the specifications and drawings.

　　设备安装将按照说明书和图纸进行。

　　380 All site erection works will be performed by the Buyer under the technical instruction of the Seller.

　　所有的现场安装工作都应在卖方的技术指导下由买方完成。

　　381 The construction company is fully in charge of the administration of all erection work.

　　建设公司完全负责全部安装工程的行政管理。

　　382 Our company cover all construction activities, that is : piling , civil engineering, mechanical erection, piping, electrical, instrumentation, painting and insulation work.

　　我们公司涉及所有施工活动，包括：打桩、土建工程、机械安装、配管、电气、仪表、油漆和保温绝缘工作。

　　383 What is the feature of this cracker (cracking furnace, heating furnace, reactor, mixer, centrifuger, belt-conveyer) ?

　　这台裂解器（裂解炉、加热炉、反应器、搅拌器、离心机、皮带输送机）的特点是什么？

　　384 The spherical tank (gas holder , container) will be shipped in the condition of edge prepared and bent plates.

　　球罐（气柜、容器）将以板加工和弯板的条件发货。

　　385 I think that the on-site training will be necessary for the tank.

　　我想槽罐焊接工作的现场培训是必要的。

　　386 The cooler (condenser, separator, boiler, generator, scrubber, stripper, heat exchanger )is a pressure vessel. It is subject to the pressure vessel code.

　　这台冷却器是一个压力容器，它必须服从压力容器法规。（冷凝器、分离器、锅炉、发生器、洗涤器、汽提器、热交换器）

　　387 The pressure vessel must be inspected by our authoritative organization-Administration of Labour.

　　压力容器必须接受我们的权威机构劳动总局的监察。

　　388 The new reciprocating (centrifugal, opposed-balanced) compressor will be installed next week.\

　　下周将安装这台新的往复式（离心式、对置平衡式）压缩机。

　　389 The distilling column( absorber, column evaporator, regenerator, column washer) is a kind of equipment for outdoor installation.

　　蒸馏塔（吸收塔、蒸发柱、再生塔、洗涤塔）是一种室外安装的设备。

　　390 The TG70 steam turbine has a operation speed of 9600 rotations per minute( RPM).

　　TG70型蒸汽透平的运转速度为每分钟9600转。

　　391 What do you think of this erection work?

　　你看这项安装工作如何？

　　392 This low (middle, high ) pressure blower (pump) will be assembled in the No.3 workshop.

　　这台低（中、高）压鼓风机（泵）将在三号车间里予以装配。

　　393 We are adjusting (installing, checking, aligning , leveling, purging )the equipment.

　　我们正在调整（安装、检查、找正、找平、清洗）这台设备。

　　394 The working team will finish the job next week.

　　工作班组将在下周干完这活。

　　395 We can adjust the levelness of the machine by means of shim and screw jack.

　　我们可以利用垫铁和螺丝千斤顶来调整机器的水平度。

　　396 After seven days , the grouted mortar will have concreted, then we shall tighten the anchor bolts.

　　灌浆在七天以后凝固，我们就将拧紧地脚螺栓。

　　397 The alignment of the coupling should be performed by two dial gauges.

　　靠背轮的找正对准应用两只千分表来进行。

　　398 The maximum allowable misalignment of the coupling is 0.02mm.

　　靠背轮找正的最大允许偏差为0.02毫米。

　　399 How many radial (axial ) clearnance are there in this bush (journal bearing , thrust bearing) ?

　　这个轴套（轴颈轴承、止推轴承）的径向（轴向）间隙是多少？

　　400 Does the bolt fit the nut?

　　螺栓与螺母不配。

　　401 We prefer welding to riveting.

　　我们认为焊接比铆接好。

　　402 Do you know how to assemble (adjust )this new machine?

　　你知道如何装配（调整）这台新机器吗？